Slant/Fin SF-10 Operation And Instruction Manual page 27

MODE 5 and 6 – External Target Temperature
Adjust Menu (2 of 2)
Item Field
External Input
Signal
Offset
Access Description
PUMP DELAY
Factory
Select the boiler pump purge time after shutting
off the burner.
EXTERNAL INPUT SIGNAL
Factory
Select the range of the external input signal.
OFFSET
Factory
Select the amount of offset when the boiler target
is determined from an external input signal.
TEMPERATURE UNITS
Factory
Select to display temperature in degrees Fahrenheit
Installer
or in degrees Celsius.
Range
OFF, 0:20 to 9:55 min,
On
Default = 0:20 min
0:10 or 2:10
Default = 0:10
-10 to +10°F
(-5 to +5°C)
Default = 0°F (0°C)
°F, °C
Default = °F
Model SF-10 Control Instructions Manual
Settings
27