Table of Contents
Advertisement
MODE 3 and 4 – Outdoor Reset & DHW Operation
View Menu (1 of 1)
I
e t
m
F
e i
d l
A
c
c
e
s s
OUTDOOR
Factory
Current outdoor air temperature as measured by the outdoor
Installer
sensor.
BOILER TARGET
Factory
The boiler target is the temperature the control is currently
trying to maintain at the boiler supply sensor or the boiler
Installer
outlet sensor.
BOILER SUPPLY SENSOR
Factory
Current boiler supply water temperature as measured by the
boiler supply sensor.
Installer
Note: This item is only available when MODE is set to 4.
BOILER OUTLET
Current boiler outlet water temperature as measured by the
Factory
boiler outlet sensor.
Installer
Note: When MODE is set to 4 this item is only visible in the
Factory access level.
BOILER INLET
Current boiler inlet water temperature as measured by the
Factory
boiler inlet sensor.
Installer
Note: This item is only available when a boiler inlet sensor is
installed.
BOILER DELTA T
Current temperature difference between the boiler outlet sensor
and the boiler inlet sensor.
Factory
Note: This item is only available when a boiler inlet sensor is
installed.
BOILER HOURS
The total number of running hours of the boiler since this item
Factory
was last cleared. Clear the numbers of hours by pressing and
holding the Up and Down buttons together while viewing this
item.
D
s e
c
i r
t p
o i
n
Model SF-10 Control Instructions Manual
R
a
n
g
e
-60 to 190°F
(-51 to 88°C)
– – –, 35 to 226°F, OFF
(– – –, 2 to 108°C, OFF)
14 to 266°F
(-10 to 130°C)
14 to 266°F
(-10 to 130°C)
14 to 266°F
(-10 to 130°C)
0 to 252°F
(0 to 140°C)
0 to 999
21
Advertisement
Table of Contents
