Onkyo HT-R695 Basic Manual page 47

> Specifications > Settings
■ 2� Source Connection
Check that each input source is connected correctly.
Follow the guidance, select the input you want to confirm,
start play of the selected player, and confirm that the
images appear on the TV and that sound is played.
■ 3� Network Connection
Set up Wi-Fi connection with an access point such as a
wireless LAN router. There are the following two methods
of connecting by Wi-Fi:
"Scan Networks": Search for an access point from this
unit. Find out the SSID of the access point beforehand.
"Use iOS Device (iOS7 or later)": Share the iOS device's
Wi-Fi settings with this unit.
If you select "Scan Networks", there are a further two
choices of connection method. Check the following.
"Enter Password": Enter the password (or key) of the
access point to connect.
"Push Button": If the access point has an automatic
connection button, you can connect without entering a
password.
• If the SSID of the access point is not displayed, then in
the screen listing the SSIDs, select "Other..." with the
cursor on the remote controller and press ENTER, then
follow the onscreen instructions.
Keyboard input
Wi-Fi Setup
SSID
a b c d e f g h i
n o p q r s t u v
1 2 3 4 5 6 7 8 9
, . / ; : @ [ ]
A/a
When finished, select the "OK" key.
To switch between upper and lower case, select "A/a" on
the screen and press ENTER. To select whether to mask
the password with " " or display it in plain text, press
＊
> Listening Modes > Playback Function
MEMORY on the remote controller. Pressing CLEAR will
delete all the input characters.
• A confirmation screen asking you to agree to the privacy
policy is displayed during network setting. Select "Yes"
and press ENTER to indicate agreement.
■ 4� Multi Zone Setup
Set the output method for audio to ZONE 2 when you want
to output audio to enjoy in a separate room from the main
room. If you have connected speakers in a separate room
with speaker cable, select "Using AV Receiver". If you
have connected a pre-main amplifier in a separate room
with an analog audio cable, select "with External Premain
Amplifier".
■ 5� Audio Return Channel
If you have connected a TV that supports ARC, select
"Yes". This unit's ARC setting turns on and you can listen
to the TV's audio through this unit.
• If you select "Yes", the HDMI CEC function is enabled
and power consumption increases during standby.
j k l m
w x y z
0 - ^ \
OK
All Erase A/a
> Basic Manual
Troubleshooting | Appendix
23