Listening Modes - Onkyo HT-R695 Basic Manual

> Specifications > Settings
4. Connect the USB storage device to the USB port of the
unit.
• If you connect a USB hard disk drive to the USB
port of the unit, we recommend that you use its AC
adapter to power it.
• If the USB storage device has been partitioned,
each section will be treated as an independent
device.
5. Press on the remote controller.
The Setup menu is displayed on the TV screen.
Setup
1. Input/Output Assign 1. TV Out / OSD
2. Speaker 2. HDMI Input
3. Audio Adjust 3. Video Input
4. Source 4. Digital Audio Input
5. Hardware 5. Analog Audio Input
6. Multi Zone
7. Miscellaneous
6. Select "7. Miscellaneous" - "Firmware Update" -
"Update via USB" with the cursors in order, then press
ENTER.
Setup
1. Input/Output Assign 1. Tuner
2. Speaker 2. Remote ID
3. Audio Adjust 3. Firmware Update
4. Source 4. Initial Setup
5. Hardware 5. Lock
6. Multi Zone
7. Miscellaneous
• If "Firmware Update" is grayed out and cannot be
selected, wait for a while until it starts up.
• You will not be able to select "Update via USB" if
there is nothing to update.
7. Press ENTER with "Update" selected to start update.
• During the update, the TV screen may go black
depending on the updated program. In that case,
check the progress on the display of the unit. The
> Listening Modes > Playback Function
TV screen will remain black until the update is
complete and the power is turned on again.
• During the update, do not turn off, or disconnect
then reconnect the USB storage device.
• "Completed!" is displayed when the update is
complete.
8. Disconnect the USB storage device from the unit.
9. Press ON/STANDBY on the main unit to turn the unit
into standby mode. The process is completed and your
firmware is updated to the latest version.
• Do not use on the remote controller.
■ If an Error Message is Displayed
When an error occurs, "＊-＊＊ Error!" is displayed on
the display of the unit. ("＊" represents an alphanumeric
character.) Check the following:
Error Code
• ＊-01, ＊-10 ：
USB storage device not found. Check whether the USB
storage device or USB cable is correctly inserted to the
USB port of the unit.
Connect the USB storage device to an external power
source if it has its own power supply.
• ＊-05, ＊-13, ＊-20, ＊-21 ：
The firmware file is not present in the root folder of the
USB storage device, or the firmware file is for another
model. Retry from the download of the firmware file.
• Others
Disconnect then reconnect the AC power cord, then
repeat from the beginning.
> Basic Manual
Troubleshooting | Appendix
33