Comfort Adjustments - Pride CELEBRITY DX SPORT Owner's Manual

V I . C O M F O R T
To adjust your scooter's reclining seat (see
figure 16):
1. With your back pressed up against the seatback, lift
up on the seatback adjustment lever and lean for-
ward or rearward to adjust the seatback angle.
2. Release the seatback adjustment lever once the seat
is in a comfortable riding position.
SEAT ROTATION ADJUSTMENT
The seat rotation lever will secure the seat into several
positions.
1. Push forward on the seat rotation lever to disengage
the seat. See figure 16A.
2. Rotate the seat to the desired position.
3. Release the lever to secure the seat into place.
FRONT-TO-BACK SEAT ADJUSTMENT
You can reposition the seat forward or rearward to adjust
the distance between the seat and the tiller. See figure 16A.
1. Move the seat sliding lever outward.
2. While holding the lever out, slide the seat forward or
rearward.
3. Release the seat sliding lever once the seat is in the
desired position.
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to different heights. See
figure 17.
1. Remove the seat and rear shroud from your scooter.
See VII. "Disassembly and Assembly."
2. Loosen the seat height adjustment nut and remove it
from the bolt. Remove the bolt.
3. Loosen the clamp-action bolt.
4. Raise or lower the upper seat post to the desired
seat height.
5. While holding the upper seat post at that height, match
up the locating holes in the upper seat post with those
of the lower seat post.
6. Insert the seat height adjustment bolt through the lo-
cating holes of both the upper and lower seat posts.
7. Install the nut onto the bolt and tighten.
8. Tighten the clamp-action bolt.
9. Reinstall the rear shroud and the seat.
32
A D J U S T M E N T S
Figure 16A. Seat Adjustment Levers
NUT
Figure 17. Seat Height Adjustment
www.pridemobility.com
SEAT ROTATION LEVER
SEAT SLIDING LEVER
NUT
CLAMP-ACTION BOLT
Celebrity DX Sport
UPPER SEAT POST
LOCATING
HOLES
SEAT HEIGHT
ADJUSTMENT
BOLT
LOWER SEAT POST