Advertisement
Comfort Seat
Tools needed:
• Standard socket set
and wrench set
• Standard hex key set
If you require any assistance with these instructions, please call Pride Technical Service at 1-877-800-1248.
Canada providers, phone 1-888-570-1113.
NOTE: This kit may contain parts that are not needed for installation on your mobility device.
Technical Instructions
www.pridemobility.com
Document Information: Rev D/October 2016
Walker Holder
Jazzy Air Seat
Tools needed:
• Standard socket set
and wrench set
• Standard hex key set
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Pride Comfort Seat
Summary of Contents for Pride Comfort Seat
- Page 1 • Standard hex key set • Standard hex key set If you require any assistance with these instructions, please call Pride Technical Service at 1-877-800-1248. Canada providers, phone 1-888-570-1113. NOTE: This kit may contain parts that are not needed for installation on your mobility device.
- Page 2 Comfort Seat Jazzy Air Seat Identifi cation Key Turn off the power to the controller. Ensure 1. U-bolt 3. Washers the mobility device is in drive mode. Refer to the 2. Accessory Mounting 4. Nuts freewheel operation label on the unit.
- Page 3 Identifi cation Key Install the walker holder into the accessory 1. Walker holder 3. Bolt mounting bracket and secure with the supplied bolt 2. Accessory Mounting Bracket 4. Nut and nut. Ensure that the walker holder points straight Resnap the fasteners on the bottom rear of the seat.
Need help?
Do you have a question about the Comfort Seat and is the answer not in the manual?
Questions and answers