Basic Playback Operation - Yamaha YAS-71CU Owner's Manual

BASIC PLAYBACK OPERATION
Once you have finished all cable connections
(~if'
P. I I to IS) and remote control preparation
(~
P. 7), follow the
procedure below to start basic playback operation.
Using various sound features
• To enjoy highly realistic sounds with surround mode
~
P.18
• To shift the optimum listening area from side to side
1&
P.19
• To select the optimum listening area
1&
P. 20
• To experience wider stereo sound when surround
mode is not activated
1&
P.2l
• To play back compressed audio signals with high-
quality sound
1&
P.21
• To delay the sound output in order to synchronize it
with the video image
1&
P. 31
• To enjoy various input sources at lower volume
1&
P.32
Now, try various features of this system!
1
Press STANDBY/ON.
This system is turned on and the power indicator
lights up. To set the system to standby mode, press
STANDBY/ON again.
'"
~<i\~
To turn off the volume temporarily, press
MUTE.
While the
mute function is activated, the MUTE indicator flashes. To
resume the volume. press
MUTE
again.
This system has the auto-sleep function. which will
automatically switch the system to standby mode if the
system is left turned on for 24 hours without any operation
being performed.
2
Press one of the input buttons to select an
input source.
For example, if a DVD player is connected to the
INPUT 1 jack of the subwoofer/system control, press
INPUT 1 to select the DVD player.
Enjoying FM broadcastsl
optional equipment
• To listen to FM broadcasts
• To control iPod playback
• To play back a Bluetooth component
1&
P.22
1&
P.27
1&
P.29
,',
~<i\~
You can also switch the input source by pressing INPUT on
the center system repeatedly. The input source changes as
follows:
3
Start playback on the selected external
component.
For information on the external component, refer to
the manual for the product.
4
Press VOLUME +/- to adjust the volume
level.
16
En