Dell Inspiron 4100 Solution Manual page 82

2H767bk0.book Page 82 Friday, September 28, 2001 1:37 PM
82 Re pl a c i n g Par t s
Downloaded from www.Manualslib.com
Remove all installed batteries, and disconnect the AC adapter cable
4
and any external devices from the computer. Wait 5 seconds before
proceeding.
Ground yourself by touching a metal connector on the back of the
5
computer.
NOTICE:
computer to dissipate static electricity that might harm internal components.
Turn the computer over, remove the screw(s) from the memory
6
module cover, and lift up the cover.
NOTICE:
tools to spread the inner metal tabs that secure the memory module.
If you are replacing a memory module, remove the existing module.
7
NOTICE:
components on a module.
Use your fingertips to carefully spread apart the securing clips on
a
each end of the memory module connector.
The module should pop up.
Remove the module from the connector.
b
manuals search engine
While you work, periodically touch unpainted metal on the
screw (2)
To prevent damage to the memory module connector, do not use
Handle memory modules by their edges, and do not touch the
memory module cover