Connecting The Keyphone System - Samsung SVM-400 Installation Manual

Samsung
SVM-400 Voice Mail System
Modular Jack Pin Arrangement Layout
Connect lines according to the following modular jack pin layout.
DLI Port

Connecting the Keyphone System

!
Never carry out installation of trunks or telephone lines when there is a storm or when
lightning strikes are possible.
!
Do not install a telephone jack in a wet location if the jack is not specially manufactured for
use in a wet location.
!
Do not touch telephone lines or interface terminals when they are connected with the
telephone lines.
The SVM-400 system provides four ports, DLI1–DLI4. Connect these to the DLI ports on the
keyphone system using a pair of cables such as #24 AWG (0.5mm) or #26 AWG
(0.4mm).
WARNING
Always take the following precautions when installing trunks or
telephone lines. Failure to do so may result in death or serious injury.
Modular Pin
Jack Number
DLI1
1,4
2,3
DLI2
1,4
2,3
DLI3
1,4
2,3
DLI4
1,4
2,3
– 15 –
Installation Manual
Description
Not Used
Digital keyset port 1
Not Used
Digital keyset port 1
Not Used
Digital keyset port 1
Not Used
Digital keyset port 1