Samsung SVM-400 Installation Manual page 16

Samsung
SVM-400 Voice Mail System
3. Push the green cable out through the rectangular hole located near to the FRG lug
(Fig. 3) and insert the cable into the groove on the base of the unit (Fig. 4.).
4. Prepare an AWG 10 (2.6mm) cable for connecting to an external ground and connect it to
the ground. Insert the cable into the groove on the base of the unit and connect it to the
green cable you inserted in the groove at step 3. There are two ways to connect the cables:
solder the ends of the two cables together, or
O
expose sufficient wire on both cables to twist them together tightly (Fig. 4.)
O
Externally grounded cable
Rectangular hole
Push out green cable through hole
Figure 3
Twist wires tightly
Green cable
Figure 4
– 9 –
Installation Manual