Oki B930 Setup Manual page 10

15.Move the catch to the right and insert the
staple module.
16.Unpack the paper punch waste container.
17.Insert the punch waste container and fully
seat it. Close the finisher door.
Install the Optional High
Capacity Feeder (HCF)
1. Make sure the printer is turned off,.
2. Unpack the HCF and remove the cushioning
materials.
3. Slide the drawer out and remove the packing
material, then close the drawer.
4. Install the mounting bracket.
5. Slide the HCF to the mounting plate guiding it
on the locating pin until it latches.
6. Remove the shipping hardware and discard.
10