Table of Contents
Advertisement
Tools and materials
required:
• #2 Phillips screwdriver
• Drill and appropriate bits
• Custom door panels
• Custom handles
• Safety glasses
Kit
Parts List:
contents
A. Fresh food door
extrusion
B. Freezer door
extrusion for non-
dispenser model and
dispenser model
using custom collar.
(Option 1)
C. Freezer door
extrusion for
dispenser model
using full-width trim.
(Option 2)
D. Handle bracket for
dispenser model using
full-width trim.
(Option 2)
This kit provides for the installation of custom handles
on 1/4" thick decorator door panels. The door extrusions
and bracket allow custom handles to be secured to the
door structure, rather than the door panels. This kit
contains all the necessary parts for dispenser and non-
dispenser models. Follow the instructions for Option 1
OPTION 1
• Carefully remove the Phillips head screws from the
For non-dispenser
door handle endcaps, top and bottom.
model or dispenser
• Open doors to 90°. Remove the screws from the
model using custom
full-length aluminum handles of both doors.
collar trim
• Retain screws, discard handles and endcaps.
Step 1
Remove
handles
ZKH1 Trim Kit
These instructions are divided into 2 options:
Option 1—For non-dispenser and dispenser models
Option 2—For dispenser model using the standard
when applying custom handles to a non-dispenser
model or dispenser model using custom collar trim.
Follow instructions in Option 2 for a dispenser model
using the standard full-width dispenser trim.
If a custom collar is to
Note:
be used, order ZWCD1 Trim Kit.
Custom Handles with 1/4" Panels
using custom collar trim.
full-width trim.
20
Hide quick links:
Advertisement
Table of Contents
