Copying The Usb Memory Data To The Display - Panasonic th-32ef1e Operating Instructions Manual

6
Select [YES] with
<ENTER>.
Data copy to the USB memory starts.
Data to USB Memory
The data will be overwritten when any data exists originally.
Are you OK to write the data?
YES
The following message is displayed after data copy
has finished.
Data copy finished.
7
After data copy has finished, remove
the USB memory device from the USB
terminal.
Copying the USB memory data to the
display
1
Insert the USB memory device with
copied data to the USB terminal of
the display of data copy destination
(same as the step 1 on page 76).
After the [Select Copy Type] screen is displayed, go
to the step 5.
Note
● If the USB memory containing the data for cloning
is connected in power-on state, the [Select Copy
Type] message in step 5 is displayed.
2
Display [Setup] menu pressing
<SETUP>.
3
Select [OSD language] with
press <ENTER> for over 3 seconds.
The following display appears.
Options
Display serial number
Software licenses
USB data cloning
Shipping
4
Select [USB data cloning] with
and press <ENTER>.
5
Select [USB Memory → Display] with
and press <ENTER>.
Select Copy Type
Display → USB Memory
USB Memory → Display
and press
NO
and
6
Select [YES] with
<ENTER>.
Data copy to the display starts.
Data from USB Memory
Do you copy the data?
YES
The following message is displayed after data copy
has finished.
Cloning finished.
Please turn off the power.
7
After data copy has finished, remove
the USB memory device from the USB
terminal.
8
Press the <Main Power On / Off
button> to turn the power OFF, and
turn the power ON again.
The copied content is applied to the display.
●
When USB memory is not removed in the step
7, the message [Select Copy Type] is displayed
when the display is turned on again.
and press
NO
English
77