No Activity Power Off; Osd Language; Multi Display Settings - Panasonic th-32ef1e Operating Instructions Manual

No activity power off

When this function is set to [Enable], the power is turned
off (standby) automatically when there is no operation of
the Display for 4 hours.
Starting from 3 minutes before the turn off, the
remaining time will be displayed.
Press any key to abort.
No activity power off
When the power is turned off due to this function, a
message [Last turn off due to 'No activity power off'.]
is displayed next time the power is turned on.
Note
●
While the screensaver is running, this function is
disabled.

OSD language

Select your preferred language.
Selectable languages
English(UK)
Deutsch
Français
Italiano
Español
ENGLISH(US)
: Chinese
中文
: Japanese
日本語
Русский
: Russian
3 min

Multi display settings

1 to 5 displays can be aligned in horizontal direction and
vertical direction respectively, and those displays are
regarded as one group. The enlarged image is shown on
the combined display.
[Multi display settings]- submenu screen
Multi display settings
Multi display setting
Horizontal scale
Vertical scale
0
Bezel H adjustment
Bezel V adjustment 0
Location
Note
●
The settings are memorised separately for each
input terminal.
●
When the multi display is set to [Off], adjust to the
same angle of view for [Position] (see page 32).
Then, set the multi display to [On]. Again, make
fine adjustment of the angle of view for [Position].
●
The [Position] menu can be adjusted in the multi
display status.
●
The multi display mode is not available with USB
input.
■
[Multi display setting]
[Off]:
The display is not divided when enlarged.
[On]:
The display is divided when enlarged.
When [On] is set, the display aspect is [16:9].
■
[Horizontal scale]
Set the horizontal scale in the multi display.
1 ‒ 5
■
[Vertical scale]
Set the vertical scale in the multi display.
1 ‒ 5
Example:
[Horizontal scale] [5] and [Vertical scale] [5] is set in
the multi display
Off
2
2
A1
English
45