Function Button Settings - Panasonic th-32ef1e Operating Instructions Manual

Function button settings

Assigns specific functions to the numeric buttons (<1>
to <6>). The buttons can be used as shortcut keys by
assigning frequently used operations.
1
Switch [Function group] with
[Function button settings] - submenu screen
Function button settings
Function group
Function button 1
Function button 2
Function button 3
Function button 4
Function button 5
Function button 6
Function button guide
2
Select the numeric button with
and set the function to assign with
.
■
Functions assignable to the numeric
buttons
[Input] (Direct input select)
Input can be selected with single-touch operation.
[HDMI1] / [HDMI2] / [DVI-D] / [PC] / [VIDEO] /
[USB]
[Memory load]
Memory can be loaded with single-touch operation.
Memory load (see page 38)
[MEMORY 1] to [MEMORY 6]
● [MEMORY 1] to [MEMORY 6] load functions are
already assigned to <1> to <6> respectively.
These settings cannot be changed.
[Shortcut]
[Signal], [Screensaver], [Set up timer], [Power
management settings], [Network settings]
● Pressing the numeric button displays the menu
screen. Pressing the button again exits the
menu screen.
[AV mute]
● Pressing the numeric button mutes the audio
and pictures.
To cancel, press any button on the remote
control except the <Standby (ON/OFF) button>.
50
English
.
Input
Input
HDMI1 ↓
HDMI2
Memory load
DVI-D
↓
PC
VIDEO
Shortcut
USB
On
Shipping condition
The following functions are assigned to the numeric
buttons as factory default.
[Input]
1 HDMI1
2 HDMI2
3 DVI-D
4 PC
5 VIDEO
6 USB
■
[Function button guide]
Sets the function display when numeric buttons are
pressed. Set this for each function group.
[On]:
Displays the function list for the numeric buttons.
[Off]:
Does not display the function list. Operation starts
when numeric buttons are pressed.
Note
●
When <FUNCTION> is pressed, [Function button
guide] will be displayed regardless of the [On] / [Off]
settings.
■
To use shortcut (numeric buttons)
1
Press <FUNCTION> or <1> ‒ <6>.
[Function button guide] will be displayed.
[Function button guide]: When [Off] is set, pressing
the numeric button starts operation.
Example: Input
Input
1. HDMI 1
2. HDMI 2
3. DVI-D
4. PC
5. VIDEO
6. USB
2
Press <FUNCTION> to switch function
group.
Example: Memory load
Memory load
1. MEMORY 1
2. MEMORY 2
3. MEMORY 3
4. MEMORY 4
5. MEMORY 5
6. MEMORY 6
[Memory
[Shortcut]
load]
MEMORY 1 [Signal]
MEMORY 2 [Screensaver]
MEMORY 3 [Set up timer]
[Power
MEMORY 4 management
settings]
[Network
MEMORY 5
settings]
MEMORY 6 AV mute