Serial Terminal Connection - Panasonic th-32ef1e Operating Instructions Manual

SERIAL terminal connection

The SERIAL terminal conforms to the RS-232C interface
specification, so that the Display can be controlled by a
computer which is connected to this terminal.
RS-232C Straight cable (commercially available)
PC
Note
●
Use the RS-232C straight cable to connect the
computer to the Display.
●
Additional computer and cables shown are not
supplied with this set.
18
English
(Male)
(Female)
D-sub 9p
Pin assignments and signal names for SERIAL
Terminal
1 2
6
Pin No.
NC (not connected)
RXD
TXD
Non use
GND (Ground)
Non use
RTS
CTS
NC (not connected)
These signal names are those of computer
specifications.
Communication parameters
Signal level: RS-232C compliant
Synchronization method: Asynchronous
Baud rate: 9600 bps
Parity: None
Character length: 8 bits
Stop bit: 1 bit
Flow control: None
3 4 5
7 8 9
Signal Name
Shorted in this set