Snmp Traps Configuration - Oki OkiLAN 6120e User Manual

Section 3 - Chapter 2 - OkiNet for NetWare
Trap Community Name
Enter the community name which will be used when
traps are sent from the OkiLAN 6120e. This setting
allows trap utilities to only accept traps from devices
with appropriate community names.
The Trap community name field is used by the OKI
OkiNet Alert and other monitoring utilities for grouping
or filtering OkiLAN 6120e devices. OkiNet Alert
assists in managing network printers by immediately
alerting you of printer problems.

SNMP Traps Configuration

The SNMP Trap option allows configuration of traps.
Traps are unsolicited information concerning the
OkiLAN 6120e. Traps can be sent to an SNMP
manager or be broadcast to all hosts on the local
segment.
To configure SNMP traps, select the SNMP Traps file
tab. The following screen will display:
Fill in the following information:
Protocol
Select the protocol for which you wish to configure
trap information.
OKI OkiLAN 6120e User's Guide III - 15