This document contains general safety, installation and operation the forefront of loudspeaker design and performance. Revel in-ceiling instructions for the Revel C283, C263, C383XC, and C363XC in- loudspeakers draw upon the same research, resources and unique ® perspective that put all Revel loudspeakers in a class by themselves.
Page 3
LOUDSPEAKER PLACEMENT FOR DISTRIBUTED 5.1-Channel Speaker Placement SOUND • In a 5.1-channel system, the surround left and surround right • Since distributed sound is general sound throughout an area, place loudspeakers should be located directly to the sides of, or up to 10 degrees behind, the main listening area.
INSTALLATION INSTRUCTIONS CONNECTING TO THE AMPLIFIER CAUTION: REMOVE POWER CAUTION: Do not use the tweeter-mounting baffle as a handle to move, carry or position the speaker. Doing so can damage the You must connect the speaker wires before the speaker is fully baffle.
MOUNTING THE SPEAKERS 4. Connect the speaker to the amplifier as explained in Connecting to the Amplifier, on page 4. For New Construction If you wish to pre-install a rough-in frame for the speakers before the drywall is installed in new construction, you will need to purchase the correct rough-in frame kit for your loudspeaker model from your authorized Revel dealer.
The square scrim cloth has pre-attached foam pads that help prevent the grille from vibrating against the ceiling. NOTE: Square grilles are available for Revel C263, C283, C363XC and C383XC speakers. Contact your authorized Revel dealer for details.
Page 7
Mounting Opening Diameter Mounting Depth Overall Dimensions (w/grille) C283 9-5/8" (244mm) 5-1/8" (130mm) 10-23/32" (272mm) Dia. x 5-5/16" (135mm) Deep C263 8" (203mm) 4-23/32" (120mm) 9-3/32" (231mm) Dia x 4-15/16" (125mm) Deep C383XC 9-5/8" (244mm) 2-3/4" (70mm) 10-23/32" (272mm) Dia. x 2-31/32" (75mm) Deep C363XC 8"...