Obtaining Service - REVELL C263 Instruction Manual

7. Insert the speaker straight into the mounting opening. Tighten the
speaker-clamp screws on the front of the speaker baffle. The speaker
clamps will automatically rotate into position and begin clamping the
speaker.
• When you notice resistance on the screws, the speaker has been
clamped successfully.
IMPORTANT: Always use low-torque settings. NEVER
over-tighten the clamp screws
C2 Speaker Clamps Inside
Mounting Cut-Out
Insert Speaker Straight Into
Mounting Cut-Out
Tighten
Clamping Screws
8. Attach the supplied grille. Powerful magnets in the speaker frame will
securely hold the grille in place.
Attach Supplied Grille
6
Painting the Grille
Revel architectural loudspeaker grilles can be painted to match any
décor. If you wish to change the grille's color, its satin finish will function
as a primer coat. For the best results follow this procedure:
1. Gently remove the scrim cloth from the back side of the grille before
painting.
2. Use a high-quality spray paint and apply a thin coat of color. Ensure
that the grille perforations remain free of paint. Filling them with
paint will diminish the speaker's sound quality. If any perforations are
plugged, use compressed air to blow the paint out of the perforations.
Note: If you find any grille perforations that are plugged with paint
after the paint has dried, carefully use a straight pin or sewing
needle to remove the paint.
3. We have included replacement scrim cloths. After the paint has dried,
apply a light coat of spray adhesive to the inside of the perforated
grille and attach a new scrim cloth. IMPORTANT: Never spray
adhesive on the cloth. The square scrim cloth has pre-attached foam
pads that help prevent the grille from vibrating against the ceiling.
NOTE: Square grilles are available for Revel C263, C283, C363XC and
C383XC speakers. Contact your authorized Revel dealer for details.
EXCESSIVE OUTPUT LEVELS
Your Revel loudspeakers feature custom-designed transducers and
high-quality network components featuring high-order filters with steep
cutoffs that reduce the potential of damage to individual speaker drivers
and help the loudspeakers maintain their performance even under
extreme operating conditions. However, all loudspeakers have limits
when it comes to continuous playback. To extend these limits, avoid
playback at volume levels that result in distorted or strained sound.

OBTAINING SERVICE

To obtain service, contact an authorized Revel dealer. Refer to Limited
Warranty, on page 8 for more information.
In-Ceiling Architectural Loudspeaker
Instruction Manual