Panasonic PV-M1327 Service Manual page 22

Top Shield Plate Ass'y
Disassembly Procedure
1. Release the 2 Clampers (B) on the Top Shield Plate Ass'y
and remove the leads from the clampers.
2. Remove 3 Screws (B). Then, remove the Top Shield Plate
Ass'y.
Clampers (B)
6 Top Shield
Plate Ass'y
Clamper
Fig. D7-1
Reassembly Notes
1. When installing the Top Shield Plate Ass'y, make sure the
2 Clampers (B) on the Cassette Up Ass'y are turned in the
direction shown.
If not, the Top Shield Plate Ass'y cannot be installed.
Clampers (B)
Fig. D7-2
Screws (B)
Clamper
Cassette Up Ass'y
TV Main C.B.A.
Disassembly Procedure
1. Disconnect Connector P1002 on the Main C.B.A.
2. Disconnect 3 Connectors PK1, PK2, and PK3 on the TV
Main C.B.A.
Note :
When disconnecting or connecting 3 Connectors PK1,
PK2, and PK3, take extreme care not to break them.
3. Remove the TV Main C.B.A. by releasing 2 Locking Tabs (B)
and A/C Cord from the frame.
Main C.B.A.
P1002
2-4
PK1
7 TV Main C.B.A.
PK3
A/C Cord
Locking Tabs (B)
Fig. D8
PK2