Panasonic PV-M1327 Service Manual page 21

Holes (A)
VCR Unit
VCR Unit
Guide Tabs (A)
Tabs (B)
Tabs (C)
Bottom view of VCR Unit
Fig. D4-2
Reassembly Notes
1. Installation of VCR Unit
1) When installing the VCR Unit, swing the Cassette Door-
Lid all the way open until the Cassette Door tab clears
the Opener Lever.
2) Make sure that all guide tabs are aligned properly.
Then, press the VCR unit in.
Cassette Door-Lid
CAUTION
View "A"
Cassette Door Tab
Opener Lever
Fig. D4-3
Press
View "A"
VCR Unit
Cassette Door-Lid
CRT Unit
Disassembly Procedure
Remove 4 Screws with Washers (A). Then, pull out the CRT
Unit.
Note:
Place the Unit face down on a soft cloth before removing the
CRT Unit.
TV
Screws with
Washers (A)
Stereo Amp C.B.A.
Disassembly Procedure
1. Disconnect 2 Connectors P4592 on the Main C.B.A. and
P4301 on the TV Stereo C.B.A.
2. Release 3 Clampers (A) on the TV Stereo C.B.A.
Then, remove the Stereo Amp C.B.A.
5 Stereo Amp C.B.A.
Clampers (A)
Main C.B.A.
P4592
2-3
4 CRT Unit
Screws with
Washers (A)
Fig. D5
(Model: I)
TV Stereo C.B.A.
P4301
Top Shield
Plate Ass'y
Fig. D6