Panasonic PV-M1327 Service Manual page 11

2. Service Position with Extension Cable Kit
In Service Position with Extension Cable Kit, mechanism check from the Bottom Side of Mechanism Chassis and Capstan Stator
Unit (Capstan Motor Drive, Loading Motor Drive Circuit) check with power on condition can be performed.
Service Position
Mode Select SW. on Main C.B.A.
Rotate
Alignment
Projection
TV Main C.B.A.
P3003
Frame
Main C.B.A.
Mode Select
SW. Connector
(Foil Side)
CAUTION:
HOT CIRCUIT
(Primary circuit) exists on the Main C.B.A. and TV Main C.B.A.
Use extreme care to prevent accidental shock when servicing.
Note:
When disassembling/assembling, refer to "Disassembly/Assembly Procedures of Cabinet" section.
tape
tape
P4001
P6002
P6201
masking tape
Safety Tab SW.
Keep away these cables from
TV Main C.B.A. as possible.
It is not necessary to connect
Degaussing Coil Connector
tape
Extension Cable -2
Mode Select SW. Ass'y
Fig. 3-1
1-9
TV
CAUTION:
HOT CIRCUIT
DO NOT
touch Power
curcuit during service.
Extension
Cable -1
Mechanism
Chassis and
Cassette Up Ass'y
P3501
Full Erase Head
Connector