Instructions For Periodic Maintenance; Service, Spare Parts And Guarantee - Makita DCS9010 Instruction Manual

Instructions for periodic maintenance

To ensure long life, prevent damage and ensure the full functioning of the safety features the following maintenance must be per-
formed regularly. Guarantee claims can be recognized only if this work is performed regularly and properly. Failure to perform the
prescribed maintenance work can lead to accidents!
The user of the chain saw must not perform maintenance work which is not described in the instruction manual. All such work must
be carried out by a MAKITA service centre.
General work
Before each start
Every day
Every week
Every 3 months
Annually
Storage

Service, spare parts and guarantee

Maintenance and repair
The maintenance and repair work of modern engines as well as all safety related assemblies require qualiÞ ed technical training and
the availability of a workshop equipped with special tools and testing devices.
We therefore recommend you to consult a MAKITA service centre for the performance of all work not described in this instruction
manual.
The MAKITA service centres are provided with all the necessary equipment and skilled and experienced personnel to work out correct
customer solutions and to advise you in all matters accordingly.
Chain saw
Sprocket
Chain brake
Chain
Guide bar
Chain lubrication
Chain brake
ON/OFF switch,
Safety locking button
Throttle lever
Fuel/oil tank
plug
Air Þ lter
Guide bar
Guide bar support
Idling speed
Fan housing
Carburetor interior and
cylinder ribs
Chain brake
Spark plug
Mufß er
Vibration damper
Chain guide
Screws and nuts
Suction head
Fuel/Oil tank
Chain saw
Guide bar/chain
Fuel/oil tank
Oil pump
Carburetor
Clean the outside and check for damage.
In case of any damage have it immediately repaired by a
service centre.
Replace in time.
Have it regularly checked by a service centre.
Check for damage and sharpness.
Resharpen regularly, replace in time.
Check the chain tension.
Check for damage.
Functional check.
Functional check.
Functional check.
Check for tightness.
Clean.
Check for damage, clean oil intake bore.
Turn it over so that the bearing surfaces are equally worn.
Replace in time.
Clean, in particular the oil guide groove.
Check (chain must not run).
Clean to ensure a perfect cooling air supply.
For this the fan housing must be demounted.
Clean, for this demount cover and protective cover.
Clean the brake band (sawdust, oil)
Check and replace if necessary.
Tighten fastening screws. Clean spark arrester screen
Check.
Check.
Check their condition and that they are Þ rmly secured.
Replace.
Clean.
Check at an authorized service centre
Demount, clean and oil slightly.
Clean the guide groove of the guide bar.
Empty and clean.
Clean.
Run empty.
Page
18
16-17
11
13-14
14
14
20
13
13
15
19
17
20
18
21
19
17
23