Table of Contents
Advertisement
03
About the video converter
The video converter ensures that all video sources are output through the HDMI OUT 1 and HDMI OUT 2
terminals.
If the TV is only connected to the receiver's composite VIDEO MONITOR OUT jacks, all the other video devices
must be connected through composite connections.
If several video components are assigned to the same input function (see
the converter gives priority to HDMI, component, then composite (in that order).
Terminal for connection
with source device
HDMI IN
P
R
P
B
Y
COMPONENT
VIDEO IN
VIDEO IN
Notes
! Among the HDMI input signals for this receiver, 1080p can be up-converted to 4K. However, this is limited to
when connected with 4K compatible televisions. Please set SCAL settings to AUTO
! The video converter may not operate and the video may not be output depending on the input signal. In such
case, put the SCAL settings to PURE and connect both the input equipment and the TV with the same type of
cable
(page 91
).
! In principle, input signals from COMPONENT VIDEO IN and VIDEO IN are output from the HDMI terminal
without resolution conversion. Depending on the resolution of the connected television, there maybe cases
where video does not output to the screen.
This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property
rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.
The Input Setup menu
on
page 62
),
Terminal for connection
with TV monitor
HDMI OUT
Video signals
VIDEO
can be output
MONITOR OUT
(page 91
).
Connecting your equipment (In case of VSX-90)
About HDMI
The HDMI connection transfers uncompressed digital video, as well as almost every kind of digital audio.
This receiver incorporates High-Definition Multimedia Interface (HDMI
This receiver supports the functions described below through HDMI connections.
! Digital transfer of uncompressed video (contents protected by HDCP (1080p/24, 1080p/60, etc.))
! HDCP 2.2 compatible terminal: BD, DVD (HDMI IN 1), SAT/CBL (HDMI IN 2), HDMI OUT 1, HDMI OUT 2
! 3D signal transfer
! Deep Color signal transfer
! x.v.Color signal transfer
! ARC (Audio Return Channel)
! 4K signal transfer
— This may not operate properly, depending on the connected equipment.
— 4K 24p, 4K 25p, 4K 30p, 4K 50p and 4K 60p signals are supported.
! Input of multi-channel linear PCM digital audio signals (192 kHz or less) for up to 8 channels
! Input of the following digital audio formats:
— Dolby Digital, Dolby Digital Plus, DTS, High bitrate audio (Dolby TrueHD, DTS-HD Master Audio, DTS-HD
High Resolution Audio), CD, SACD (DSD signal), OBJECT based audio (Atmos)
! Synchronized operation with components using the Control with HDMI function (see
tion
on
page 85
)
Notes
! An HDMI connection can only be made with DVI-equipped components compatible with both DVI and High
Bandwidth Digital Content Protection (HDCP). If you choose to connect to a DVI connector, you will need a
separate adaptor (DVIdHDMI) to do so. A DVI connection, however, does not support audio signals. Consult
your local audio dealer for more information.
! If you connect a component that is not compatible with HDCP, an HDCP ERROR message is displayed on
the front panel display. Some components that are compatible with HDCP still cause this message to be dis-
played, but so long as there is no problem with displaying video this is not a malfunction.
! Depending on the component you have connected, using a DVI connection may result in unreliable signal
transfers.
! This receiver supports SACD, Dolby Digital Plus, Dolby TrueHD and DTS-HD Master Audio. To take advantage
of these formats, however, make sure that the component connected to this receiver also supports the corre-
sponding format.
! Use a High Speed HDMI
®
TM
/
Cable. If an HDMI cable other than a High Speed HDMI
not work properly.
! When an HDMI cable with a built-in equalizer is connected, it may not operate properly.
! Signal transfer is only possible when connected to a compatible component.
! HDMI format digital audio transmissions require a longer time to be recognized. Due to this, interruption in the
audio may occur when switching between audio formats or beginning playback.
! Turning on/off the device connected to this unit's HDMI OUT terminal during playback, or disconnecting/con-
necting the HDMI cable during playback, may cause noise or interrupted audio.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing, LLC in the United States and other countries.
"x.v.Color" and
are trademarks of Sony Corporation.
28
®
/
TM
) technology.
Control with HDMI func-
®
TM
/
Cable is used, it may
- Quick Links:
- Connecting Your Equipment
Hide quick links:
Advertisement
Chapters
Table of Contents
