Pioneer VSX-90 Operating Instructions Manual page 34

03
Basic MULTI-ZONE setup (ZONE 2)
%
Connect a separate amplifier to the AUDIO ZONE 2 OUT jacks on this receiver.
You should have a pair of speakers attached to the sub zone amplifier as shown in the following illustration.
Sub zone (ZONE 2)
AUDIO IN
R L
MULTI-ZONE setup using speaker terminals (ZONE 2)
! You must select ZONE 2 in Speaker system setting (page 110
% Connect a pair of speakers to the surround back speaker terminals.
You should have a pair of speakers attached to the surround back speaker terminals as shown below.
Sub zone (ZONE 2)
L R
Main zone
ZONE 2
PRE OUT
L
R
ZONE 2
PRE OUT
L
R
) to use this setup.
Main zone
SURROUND BACK
R L (Single)
HDZONE / BI-AMP
SURROUND BACK
R L (Single)
HDZONE / BI-AMP
Connecting your equipment (In case of VSX-90)
MULTI-ZONE setup using HDMI terminal (HDZONE)
Important
! MAIN/HDZONE at ZONE Setup must be set to HDZONE in order to use the HDZONE function
! To use the HDZONE functions, set Control or Control Mode in HDMI Setup to OFF. For details, see
Setup on page 86 .
% Connect a separate receiver to the HDMI OUT 2 (HDZONE) terminal on this receiver.
Connect speakers and a TV to the HDZONE receiver as shown on the illustration below.
Sub zone (HDZONE)
HDMI IN
34
(page 114
HDMI
Main zone
HDMI OUT
2 1
HDMI OUT HDZONE/MAIN MAIN
SELECTABLE ARC CONTROL
2 1
HDZONE/MAIN MAIN
SELECTABLE ARC CONTROL
).