3.1.4.13 Variable Management - Delta DX-2100 Series User Manual


Date: the date when the alarm occurred

Name: the name of the occurred alarm

Description: the description of the occurred alarm
For example: Register $2003 represents electrical voltage, the value of register
$2003 is 10, and the alarm content is set as: {Date} {Time} Voltage = {$2003},
then the alarm content received by users will be: 2015/06/01 10:00:00 Voltage =
10. The maximum content length is 160 characters.
Target Receiver
Set up the recipient. The alarm notification will be sent via email, up to 5 email
addresses can be used and separate each recipient with a semicolon.
Notice
{} is a special system symbol, which is used to reference system variables or system
registers, like ${Time}, ${Date} or ${Number 0 - 4095}. Please use it with caution.

3.1.4.13 Variable Management

This page is used for setting up the variables. Click "Add" to set a new variable. Click "Edit" to modify the existing variable.
Click "Delete" to delete the existing variable.
The address segment 2048~4095 can be self-defined. The Variable Name, Alias, Length, and Uploaded To Cloud can be
set up. After clicking "Add", the following page will show up.
Variable Name
Register address. The allowable range is 2048~4095. Start with $.
Description
Description
C ha pt er 3 I ntr o duc t i on t o F u nc t i o ns
Default
N/A
Default
N/A
_3
3 - 3 7