Static Routing Rules - Delta DX-2100 Series User Manual

Device Name
Set up a device name for your router. The name shall be composed of
letters, numbers and underline, starting with a letter or number. The
maximum string length is 32 bytes.
IP Address
Set up an IP address for your device.
Network Mask
Set up the LAN network mask.
DHCP Server
Dynamic Host Configuration Protocol allows you to obtain an IP address
automatically from your router. You can enable or disable this functionality.
Address Lease Time
To set up the address lease time so that a client doesn't hold an IP address
indefinitely. It allows for a mechanism to gracefully reuse DHCP addresses.
Options here are 1 to 3 days.
First IP Address
To increase the number of addresses available to clients, you can change
the Start Address.
Last IP Address
To increase the number of addresses available to clients, you can change
the End Address.
STP
STP is a network protocol that builds a logical loop-free topology for Ethernet
networks. The basic function of STP is to prevent bridge loops and the
broadcast radiation that results from them. If this STP is enabled, the traffic
usage will increase about 15Mbit in 24 hours.
3.1.2.3

Static Routing Rules

This page is used for setting up the Static Routing, including the Rule Name, Network Interface, Enabled, Destination IP,
Network Mask, Gateway Address and Metric. Click the "Add A Rule" to add static routing rules.
After clicking the "Add A Rule", you will see the following page.
Description
C ha pt er 3 I ntr o duc t i on t o F u nc t i o ns
Default
DX2100 + "_" +
"the last four
digits of Mac
address"
192.168.1.1
255.255.255.0
Enable
One day
192.168.1.100
192.168.1.200
Disable
_3
3 - 1 1