EMPTYING THE DIRTY WATER TANK
WARNING: DO NOT exceed the max fill line on the dirty water tank.
Press the dirty water tank release lever.
1
Turn the tank cap anti-clockwise to open.
3
WARNING: Always switch the cleaner off and unplug it from the
electrical socket before emptying the dirty water tank.
Remove the dirty water tank from the
2
cleaner.
Empty the tank. Rinse the tank with clean
4
water and allow to dry before storing the
cleaner.
8
-
-
CLEANING THE EXHAUST FILTER
Press the exhaust filter
release latch.
Remove the exhaust filter
chamber.
Remove the filter from the
chamber.
Rinse under hand warm
water to remove any
debris. Allow to completely
dry before returning to the
cleaner.
CLEANING THE PRE MOTOR FILTER
Remove the dirty water
tank from the cleaner.
Take out the pre motor
filter, then clean it.
IMPORTANT: Clean the filters
after each use.
WARNING: Ensure both filter are
fitted to the cleaner before use.
GB