Filling The Clean Water Tank - Hoover CLEANJET EVO Series User Manual

FILLING THE CLEAN WATER TANK

The clean water tank holds the water and cleaning
solution.
IMPORTANT: Always turn the cleaner off and
disconnect from the electrical outlet before filling
the clean water tank.
IMPORTANT: When filling the
clean water tank, do not exceed
the max fill line.
NOTE: Before using this
appliance, please ensure
dirty water tank release
lever and inlet cover are
fully locked.
Press the clean water tank release latch
3
and remove from the cleaner.
WARNING: Use only Hoover carpet cleaning solution. Using other solution brands may cause excess foaming and will
prevent the cleaner from working effectively.
Using other solutions may affect your warranty
Add the required amount of cleaning fluid to
1
a measuring jug.
(approx. 40ml per 1L of water)
Open the screw cap on the bottom of
4
the tank.
4
- -
Mix the solution with warm water.
2
(Max. temperature - 40ºC)
Pour the solution into the clean water
5
thank. Do not exceed the max fill line.
Replace the cap and return the clean
water tank to the cleaner.
GB