This appliance can be used by children aged from 8 years operation of this appliance we recommend that any servicing and above and persons with reduced physical, sensory or or repairs are only carried out by an authorised Hoover mental capabilities or lack of experience and knowledge if service engineer.
Please take the time to read this manual carefully. HANDLE RELEASE You’ll then be ready to make the BUTTON most of the special features only CARRY HANDLE the new Hoover can offer! UPPER STORAGE HOOK CLEAN WATER TANK POWER CORD INLET COVER DIRTY WATER TANK...
Page 4
PREPARING YOUR CLEANER BEFORE CLEANING A CARPET • Vacuum thoroughly. Remove the contents of the packaging. Raise the handle to the upright position You should find the following: until it locks in place. • Test for colourfastness • Move the furniture •...
Replace the cap and return the clean water tank to the cleaner. WARNING: Use only Hoover carpet cleaning solution. Using other solution brands may cause excess foaming and will prevent the cleaner from working effectively. Using other solutions may affect your warranty...
(press trigger) and recover the solution on the backward stroke (release trigger). WARNING: Use only Hoover carpet cleaning solution. Using other solution CAUTION: This product is intended for cleaning brands may cause excess foaming and will prevent the cleaner from working purpose only.
Page 7
USING THE UPHOLSTERY BRUSH Lift the inlet cover Insert the hose connector Press the ON/OFF pedal NOTE: Do not over saturate your upholstery. NOTE: The clean water tank will need to be filled with solution and water before use. Take out the flexible hose and the upholstery brush Pull upholstery brush back Upholstery brush can only work with...
CORD CLIP STORAGE Put the flexible hose * and the upholstery brush * back into the bag for storage. Do not run over the power cord. Before storing the cleaner: Clip the power cord in the cord clip at the back of the Turn the cleaner off and disconnect from the electrical handle to avoid accidentally running the cleaner over socket.
EMPTYING THE DIRTY WATER TANK CLEANING THE EXHAUST FILTER Press the exhaust filter release latch. WARNING: DO NOT exceed the max fill line on the dirty water tank. Press the dirty water tank release lever. Remove the dirty water tank from the cleaner.
IMPORTANT: Switch the cleaner off and CLEANING THE BRUSHBAR* CHANGING THE BRUSHBAR* remove the plug from the electricity supply before dismantling cleaner Turn the cleaner upside down. Remove any threads or debris from the brush bar. Press the dirty water tank release Turn the cleaner over.
Page 11
IMPORTANT: Switch the cleaner off and remove the plug from the electricity supply CHANGING THE AGITATOR / BELT* before dismantling cleaner. Turn cleaner over and remove 7 Remove the belt cover and safety Slide the agitator assembly out retaining screws. bar.
Hoover Service If your cleaner is not working properly run through the following checklist. Should you require service at any time, please contact your local Hoover Service Office. WARNING: To reduce the risk of personal injury, unplug the carpet washer Hoover spares and Consumables Always replace parts with genuine Hoover spares.
Need help?
Do you have a question about the CLEANJET EVO and is the answer not in the manual?
Questions and answers