User Mode - JOVY Systems iSolder 40 User Manual

Jovy Systems® Limited

3. User mode

The iSolder-40 Station offers the user 2 different adjustable modes: Mode 1 and
Mode 2, to enter the desired mode use the button.
The default mode will be the Automatic iControl mode.
A) User Mode 1
To enter User Mode 1, default starting mode, make sure that button's position is
downwards otherwise press the button until its position is downwards just as in
the following picture. Notice that Entering mode 2 is done AFTER the station is
turned on.
B) User Mode 2
To enter User Mode 2, press the button to change its position to become upwards
just as in the following picture.
User Manual
Revision
Date
UM1501SLD01
1.00
August 2015
Page | 8