Table of Contents
Advertisement
Quick Links
Operating Manual
Jetronix-Eco
●
Version 1.01
1/4/2013
Last edited: 01 April 2013
This document is copyright © by Jovy Systems® Limited. All rights reserved.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language, in any form or by any means,
electronic, mechanical, photocopying, recording, or otherwise, without prior written permission from Jovy Systems® Limited.
All copyrights, confidential information, patents, design rights and all other intellectual property rights of whatsoever nature contained herein are and shall remain
the sole and exclusive property of Jovy Systems® Limited. The information furnished herein is believed to be accurate and reliable.
However, no responsibility is assumed by Jovy Systems® Limited for its use, or for any infringements of patents or other rights of third parties resulting from its
use.
The Jovy Systems® Limited name and Jovy Systems® Limited logo are trademarks or registered trademarks of Jovy Systems® Limited.
All other trademarks are the property of their respective owners
This User Guide provides detailed guide on how to use the Jetronix-Eco Software
Advertisement
Table of Contents
Related Manuals for JOVY Systems Jetronix-Eco
Summary of Contents for JOVY Systems Jetronix-Eco
- Page 1 Jovy Systems® Limited. The information furnished herein is believed to be accurate and reliable. However, no responsibility is assumed by Jovy Systems® Limited for its use, or for any infringements of patents or other rights of third parties resulting from its use.
-
Page 2: Table Of Contents
Table of Contents Introduction ........................4 ............................4 URPOSE ....................... 4 ETRONIX EATURES ................... 5 ETRONIX IELD OF PPLICATIONS Jetronix-Eco Technical Data ..................6 ....................6 RODUCT ECHNICAL PECIFICATION ..................7 ETRONIX ARTS ESCRIPTION ....................... 12 PERATING PRECAUTION ........................12 AFETY INSTRUCTIONS Initial Setup ........................ - Page 3 • The glossary provides definitions of technical terms that appear in the guide. “ Jetronix-Eco” Operating Manual organized in chapters and ends with a glossary of the terms and abbreviations used. Chapters contain all what's related to the Product features, Technical Data, Safety precautions Product initial Set up, operating instructions and warranty policy ends how to get the Technical support.
-
Page 4: Introduction
The Operating Manual provides a standard guide for the user. The user can develop own operating method after complete understanding, following and practice the information in this Manual. The Operating Manual is the only reference for using Jetronix-Eco, it is recommended to read it carefully before using the product. Jetronix-Eco Features ... -
Page 5: Jetronix-Eco Field Of Applications
• Heavy Mass CCGA & CBGA. • Under fill or epoxy coated components. • QFN, VQFN and advanced design QFN. • Package over package (POP)... Graphical widescreen LCD. Jetronix-Eco Operating Manual Page 5 of 22 ©Jovy Systems 2013. All rights reserved... -
Page 6: Jetronix-Eco Technical Data
Suction Pump 60 -90 dpi (Lifting power up to 150 gm.) Cooling fan Horizontal Cross flow Fan Max. Application 290* 315 mm size Total weight 28 Kg. Jetronix-Eco Operating Manual Page 6 of 22 ©Jovy Systems 2013. All rights reserved... -
Page 7: Jetronix-Eco Main Parts Description
PCB from its flat edges. PCB clamp to be closed after placing the PCB. The used clamps should not be closed over or make minimal stress to any PCB comments. Jetronix-Eco Operating Manual Page 7 of 22 ©Jovy Systems 2013. All rights reserved... - Page 8 Upper Heater Block with Arm together Rotate 180° from Left to Right and reverse. L/R rotation fastener Stop the arm and make it non-movable. Jetronix-Eco Operating Manual Page 8 of 22 ©Jovy Systems 2013. All rights reserved...
- Page 9 Upper heater Block safety fastener Upper heater Arm L/R rotation fastener Upper heater Block fastener 2.2.3 Heaters Technical Details Lower Heaters segmented in Two Zones. Total Heaters Power is 2800 watts. Jetronix-Eco Operating Manual Page 9 of 22 ©Jovy Systems 2013. All rights reserved...
- Page 10 One Heater of 80mm x 80mm with total power of 400 watts. 2.2.4 Machine peripherals K-type thermocouple embedded inside Flexi tube for easy placement over the PCB. Optional K-type thermocouple channel. Jetronix-Eco Operating Manual Page 10 of 22 ©Jovy Systems 2013. All rights reserved...
- Page 11 Large PCB supports in two pieces to prevent PCB damage during the heating process. The suction Pen with high power of 60 dpi to 90 dpi (lifting objects up to 150gm weight) Jetronix-Eco Operating Manual Page 11 of 22 ©Jovy Systems 2013. All rights reserved...
-
Page 12: Operating Precaution
• To avoid possible electric shock caused serious damage, please disconnect the power cord from the outlet temporary before moving machines. • Pull out the power if don’t use the machine for a long time. Jetronix-Eco Operating Manual Page 12 of 22 ©Jovy Systems 2013. All rights reserved... -
Page 13: Initial Setup
- Please make sure that the supply voltage accords with the rated voltage on the system nameplate then connect the power cord. 230V-250V/15A - Insert the vacuum tube into the suction pump nozzle - Run the CD and copy files into a known folder “Jetronix-Eco” Jetronix-Eco Operating Manual Page 13 of 22... -
Page 14: Operating Instructions
Alarm set point, at this temperature value the machine buzzer will start working, as audiable warnning. Jetronix-Eco Operating Manual Page 14 of 22 ©Jovy Systems 2013. All rights reserved... - Page 15 OFF to deactivate the audiable sound. TC1 is the default Main Thermocouple reading – Built in machine thermocouple, to choose the optional thermocouple as main TC, choose TC2 Jetronix-Eco Operating Manual Page 15 of 22 ©Jovy Systems 2013. All rights reserved...
-
Page 16: Process Profile Parameters
Process Profile Parameters 4.2.1 Create Jetronix-Eco Process Profile divided into optional 1 to 4 stages, user can create a process profile of at least 1 stage. Preheat stage is preprogramed and heaters power predefined, while the other user define the hetars power for each zone. - Page 17 Save process profile After input the process profile paramters save the profile in the machine memory (Memory can save up to 50 profiles). Press enter and choose Save profile Jetronix-Eco Operating Manual Page 17 of 22 ©Jovy Systems 2013. All rights reserved...
- Page 18 The Running Process window display the temperature and stage status ( the stage running will be in converted color). Jetronix-Eco Operating Manual Page 18 of 22 ©Jovy Systems 2013. All rights reserved...
- Page 19 Delete all Process Profiles saved in machine memory in one step by chose Format , and confirm Delete all A message will be displayed that no profiles saved after this step done Jetronix-Eco Operating Manual Page 19 of 22 ©Jovy Systems 2013. All rights reserved...
-
Page 20: Warranty Policy
[Jetronix-Eco] [Version 1.01] Warranty Policy Thank you for purchasing Jovy systems product, you did your good decision. We committed with quality and warranty as follows: The complete machine has a warranty period of 6 months from the time of purchase. -
Page 21: Getting The Technical Support
Operating Manual [Jetronix-Eco] [Version 1.01] Getting the Technical Support For after sales service at utmost levels and Jovy Systems customer care, we have many support ways in the following points: • Many process profiles for the common applications. • White papers. -
Page 22: The Glossary
Zone3 Side heaters heating zone °C Celsius °F Fahrenheit For exclude the preheating stage from the process profile For include the preheating stage as one of process profile stages Seconds Jetronix-Eco Operating Manual Page 22 of 22 ©Jovy Systems 2013. All rights reserved...