Philips Norelco S5370CC Manual page 16

ENGLISH
30
11 Press the top cap down, pull the shaver
forward and lift shaver from SmartClean
holder.
◗ The SmartClean System automatically turns
off 30 minutes after the cleaning cycle is
complete.
12 Carefully shake off excess liquid and let the
shaving unit air dry completely.
You can also leave the shaver in the SmartClean
System overnight to dry.
Extra-thorough cleaning method
Do not mix up the cutters and combs as the
shaving performance may be adversely affected
for several weeks before optimal shaving
performance is restored.
1 Turn shaver OFF.
C
2 Press the shaver head release button and
open the shaving unit.
C
3 Pull the shaving head holder off the
bottom part of the shaving unit.
C
4 Turn the retaining ring counterclockwise
2
(1) and lift it off the shaving head (2).
1
C
5 Remove one shaving head from the shaving
head holder. Remove the cutter from the
comb.
Do not clean more than one cutter and comb
at a time, since they are all matching sets. If you
accidentally put a cutter in the wrong comb, it
may take several weeks before optimal shaving
performance is restored.
C
6 Clean the cutter and comb under warm
tap water.
C
7 After cleaning, place the cutter back into
the comb with the cutter legs pointing
downwards.
C
8 Put the shaving head back into the shaving
head holder.
Make sure the projections of the shaving head
fit exactly into the recesses on the shaving head
holder.
ENGLISH
31