Agency Approvals; Fcc Notice - Oneil MICROFLASH 2TE User Manual

MICROFLASH 2Te PRINTER USER'S GUIDE

Agency Approvals

FCC Notice

This equipment has been tested and found to comply with the
limits for a class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
This equipment has been verified to comply with the limits for a
class B computing device, pursuant to FCC Rules. Operation with
non-approved equipment is likely to result in interference to radio
and TV reception.
The user is cautioned that changes and modifications made to the
equipment without the approval of manufacturer could void the
user's authority to operate this equipment.
This device and its antenna(s) must not be co-located or operated
in conjunction with any other antenna or transmitter within 20
centimeters.
INDUSTRY CANADA STATEMENT
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
14