Installing Paper - Oneil MICROFLASH 2TE User Manual

MICROFLASH 2Te PRINTER USER'S GUIDE
Caution: The operating temperature of this portable
printer is 50° C. However, the operating temperature
when used with O'Neil power supply for charging the
portable printer is limited to 40° C. Please charge the
printer in a suitable location that meets this
temperature requirement.
Caution: (For US/Canada) Please only use the O'Neil
part number 220240-100 power supply with this
product.

Installing Paper

1. Insert a roll of paper with the end of the roll exiting
from the bottom of the paper cavity (Figure 3).
2. Open the print head by raising the green, print head
release lever until it stops (Figure 4).
Figure 3
3. Wake up the printer by briefly pressing the green,
self-test button (Figure 5).
Figure 4
3