CODELOCKS CL5000 Programming & Operating Instructions Manual page 10

PROGRAMMING
WEEKEND LOCK OUT
This is an on/off (toggle) command.
• •
#Master Code 18
Result: No User Codes will be able to open lock during
weekend period.
Note: Repeating the sequence will remove the weekend lock out for
all User Codes with previous weekend access.
• •
#Master Code 18
Result: All User Codes will be able to open lock during
weekend period.
Note 1: Using this program will lock out ALL User Codes over a
weekend (Saturday/Sunday).
Note 2: Using Program 17, an active User Code may be entered
in this lockout period if desired.
10
PROGRAM 18
••
18
••
18
DOWNLOAD AUDIT DATA & SETTINGS: Lock to USB Stick
•
#Master Code
seconds). Audible BEEP will signify process completed.
Result: Audit Trail and settings data will be downloaded to USB Stick
from lock.
•
To view data, insert USB Stick into PC with Codelocks DMS
installed.
UPLOAD OF NEW/CHANGED SETTINGS: USB Stick to Lock
•
Insert USB Stick into PC with Codelocks DMS installed.
Follow on screen prompts and make required changes and
save to USB Stick.
•
Remove USB Stick and insert into lock USB port.
•
#Master Code
•
seconds) (flash for 35 seconds).
Audible BEEP will signify process completed.
Result: New/changed settings uploaded to lock and now active.
Note 1: Lock buttons should not be pressed through extended
•
and LED flashing sequences during upload or download.
Note 2: USB Stick must not be removed during upload/download.
• •• •
19 1 followed by (flash for 35
• •• •
19 2 followed by (flash for 10
PROGRAM 19
•