Powering On/Off The Projector; Powering On The Projector - Optoma EH320USTi User Manual

Installation
™ Turn on the projec-
tor first and then
select the signal
sources.
(*) Optional
™
accessory.
16
English

Powering On/Off the Projector

Powering On the Projector

1. Securely connect the power cord and signal cable. When
connected, the On/Standby LED will turn Red.
2. Turn on the lamp by pressing " " button either on the top of
the projector or on the remote. The On/Standby LED will now
turn Blue.
The startup screen will display in approximately 10 seconds.
The first time you use the projector, you will be asked to
select the preferred language and power saving mode.
3. Turn on and connect the source that you want to display
on the screen (computer, notebook, video player, etc). The
projector will detect the source automatically. If not, push
menu button and go to "OPTIONS".
Make sure that the "Source Lock" has been set to "Off".
If you connect multiple sources at the same time, press the
™
"SOURCE" button on the Remote Control or direct source
keys on the remote control to switch between inputs.
Power
or
L
Page-
Keystone
-
1
4
HDMI
7
User1
Source
Switch
Freeze
R
Enter
Laser Page+
Volume
-
+ +
2 3
Menu 3D
5 6
VGA Video
8 9
User2 User3
0
Resync