Inspection Of Steering Vertical Column Components - Hisun HS500ATV Maintenance Manual

4.1.1.2：Inspection of steering vertical column components:
1.Check whether the nut between the inner ball pin of tension
rod and the Turning shaft arm is tightened.( Figure 4-1-8)
In case of loosen or worn out, tighten it with proper tools
or replace with identical nuts.
4.Hexagon open-groove nut M10
5.Pull out the components of the steering
vertical column
seat.( Figure 4-1-7)
1
Figure 4-1-7
1、
Steering Vertical Column
2、
Bottom Seat
from the
2
bottom
55