Iconfig Software; Launching Iconfig - iConnectivity iConnectAUDIO 2 Owner's Manual

iConfig Software

iConfig, the included software program for Mac and Windows provides access to the
+
set-up and routing features in your iConnectAUDIO2 , as well as any other iConnectivity
interfaces connected to your system.
The active settings "snapshot" is stored in the interface's onboard flash memory. It can
be copied into the iConfig software for editing (the "Restore from FLASH" command).
iConfig works the same on Mac, iPads, and Windows.

Launching iConfig

When you have multiple iConnectivity interfaces connected to your computer, the
Device Selection dialog will appear; simply select the one to be configured. If you have
+
only the iConnectAUDIO2 , it will be selected automatically in the dialog without
intervention.
iConfig checks for firmware updates every time it's launched.
20