iConnectivity iConnectAUDIO 2 Owner's Manual page 12

Quick Start Notes
- No additional drivers are required for Mac or iOS. Windows driver available here. Set-
up instructions are in the following section.
+
- No Mac or iPad drivers are needed. The iConnectAUDIO2 is USB class-compliant, so
it's recognized automatically by Mac OS X and iOS for applications to pass audio and
MIDI as soon as it's connected.
- IF YOU HEAR NOTHING FROM YOUR SPEAKERS OR HEADPHONES: please
check that levels are turned up, either using the Interactive Touch Display or Audio
Mixer tab in the iConfig software. This is explained in the Quick Start Guide.
- If you've made changes in iConfig, check that the output source you're monitoring is
routed correctly in the Audio Patchbay.
- The default 16-bit/44.1kHz audio setting ensures compatibility with iOS software that
doesn't operate at higher rates, but it can be changed up to 24-bit/96kHz in the iConfig
software's Audio Info tab.
12