Table of Contents
Advertisement
Radio
Operation
Introduction to the subject
The device allows analogue radio reception of FM and AM frequency ranges as
well as DAB digital radio reception.
CAUTION
For vehicles with window antennas do not stick foil or metal coated stickers
■
to the window as this can lead to interference.
Car parks, tunnels, tall buildings or mountains can interfere with the radio
■
signal even causing it to fail completely.
Main menu
›
To display the main menu, press the
Main menu
» Fig. 6
The selected radio station (description or frequency)
A
Radio Text (AM, FM) / Description of the group (DAB)
B
Preset station buttons for favourite channels
C
Choice of radio range (FM / AM / DAB)
D
Choice of storage groups of the preferred station in the selected broad-
casting ranges (e.g. FM1, FM2 or FM3)
Changing the station
Manual / semi-automatic station search
Radio Text display
Radio main menu settings
12
Radio
Fig. 6
Main menu
button.
Information symbol in the status line
Symbol
Traffic information station
Traffic information signals are not available or the selected sta-
tion is not a traffic information station
Signal is not available (DAB)
RDS function is switched off (FM)
AF Alternative frequency is switched off (FM)
If the displayed station name continuously changes (dynamic text), then it is
possible to fix the current text by holding your finger on the device screen in
the station name area. The station name is shown in full by holding your finger
in the area of the station name again (FM).
Search for station and select frequency
Station search
›
Tap on the Radio function surface in the main menu.
Depending on the setting → Arrow buttons: will set an available station from
the Stations list or a station of the current broadcast range on the Stations
buttons.
Select frequency
›
Tap on the Radio function surface. It current frequency range appears in
the scale.
›
To set the desired frequency value, tap the function surface or at the
bottom of the screen or rotate the controller or use your finger to move
the scale.
The frequency selection is terminated by pressing the controller.
Scan through the stations one after the other (scan)
The function scans through all the available stations in the current frequency
range in succession, for a few seconds each.
›
To start/finish the automatic play of the available stations, press the control-
ler in the Radio main menu.
Meaning
Advertisement
Table of Contents
