Table of Contents
Advertisement
Alphanumeric with keyboard
The alphanumeric keypad is used to enter characters.
Description of the alphanumeric keyboard
Input line
A
Context-dependent:
B
▶
- Switch to capital letters
▶
- Switch to special characters
▶
- Switch to numbers
Context-dependent:
C
▶
- Switch to numbers
▶
- Switch to Latin letters
▶
- Switch to Cyrillic letters
Context-dependent:
D
▶
- Confirmation of the entered character
▶
- Display of searched entries (the number of searched entries is dis-
played in the function surface)
Return to the higher-level menu
Erase the entered characters
By holding the variants of each type are displayed.
Exchange between the more keyboard languages
Enters a blank
Move the cursor within the input line to the left
Move the cursor within the input line to the right
Search
While entering characters, a search is made for corresponding entries.
The entry such as a telephone contact to be searched for must be entered
along with the special characters (diacritics).
10
Device operation and settings
Fig. 4
Example of the keyboard display
» Fig. 4
By tapping on the function surface a list of matching entries opens. If fewer
than 4 entries are found, a list of the found entries opens automatically.
Device settings
Configuration wizard
The Configuration wizard is automatically displayed if there are at least two
non-selected menu items after turning on the device, or if a new user account
in personalisation is selected.
Disable the automatic display of the Configuration wizard by tapping the func-
tion surface Don´t show again.
›
For manual display, press the
figuration wizard.
The Configuration wizard allows you to set the following menu items in se-
quence.
Renaming the user account of personalisation
ual
Time setting (not applicable for Yeti)
Date setting (not applicable for Yeti)
Storing the radio stations with the currently strongest reception signal
in the first memory group of each individual broadcast area
Pairing and connecting a phone to the device
The selected menu item is provided with the
Menu items which are not set can be set by tapping on the respective function
surface in the
» Fig. 5
area.
A
Fig. 5
Configuration wizard
button, then tap the function surface Con-
»
Vehicle - Owner´s Man-
symbol.
Advertisement
Table of Contents
