Device operation and settings
Device operation
Operating principles
Fig. 3 Screen area / screen display
Description of the display
» Fig. 3
Status line with time and outdoor temperature information and other in-
A
formation
Information and the operation of the current menu
B
Function surfaces of the current menu
C
Identification of the current menu
D
Return to the higher-level menu
E
Open a sub menu of the menu item with the "pop-up window"
F
Menu item with "Checkbox"
G
▶
- Function is switched on
▶
- Function is switched off
Scroll symbol - positioning and moving in the menu is possible by moving
H
fingers on the scroll symbol up or down
▶
Finger touch above the scroll symbol - changes to the next screen im-
age up
▶
Finger touch below the scroll symbol - changes to the next screen down
Function surfaces
The screen areas which confirm a function or a menu are called "function sur-
faces".
▶
White text - the surface is active and thus selectable
▶
Grey text - the surface is inactive and thus not selectable
▶
Green frame - currently selected surface
Selecting menu/menu item/function
▶
By tapping on the function surface or .
▶
Turning the knob .
Confirming menu/menu item/function
▶
By tapping on the function surface.
▶
Press the wheel .
Returning to higher-level menu
▶
By tapping on the function surface .
▶
By tapping on the screen outside of the "pop-up window".
▶
By pressing the corresponding button next to the screen (e.g. in the menu
Media, by pressing the
button).
Select the menu item / function value
▶
- Selected menu item / function value
▶
- Deselected menu item / function value
Set value
▶
By pressing the function surface with one of the following symbols , , , ,
, .
▶
By touching or moving your finger over the scale.
▶
Turning the knob .
Note
Depending on the equipment, the device can be operated with the operating
lever or via the buttons on the multifunction steering wheel. Additional infor-
mation
»
Vehicle Owner´s Manual.
Device operation and settings
9