Advertisement

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FT98 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Fuel Fitness FT98

  • Page 2: Table Of Contents

    TABLE OF CONTENTS Product Registration Important Safety Instructions Important Electrical Instructions Important Operation Instructions FT98 Assembly Instructions Operation of Your Treadmill Programmable Features Heart Rate General Maintenance Manufacturer’s Limited Warranty ATTENTION THIS TREADMILL IS INTENDED FOR RESIDENTIAL USE ONLY AND IS WARRANTED FOR THIS APPLI- CATION.
  • Page 3: Product Registration

    Thank you for your purchase of this quality treadmill from FUEL FITNESS. Your new backed by one of the most comprehensive warranties available. FUEL FITNESS will do all we can to make your ownership experience as pleasant as possible for many years to come. If you have questions, or if parts are missing or damaged, or you require customer service, call 1-866-697-6531.
  • Page 4: Important Safety Instructions

    Quality athletic shoes are recommended to avoid leg fatigue. Failure to follow all guidelines may compromise the effectiveness of the exercise experience, expose yourself (and possibly others) to injury, and reduce the longevity of the equipment. SAVE THESE INSTRUCTIONS - THINK SAFETY! FT98 TREADMILL...
  • Page 5: Important Electrical Instructions

    The temporary adapter should be used only until a the like, extending from the adapter, must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw. FT98 TREADMILL...
  • Page 6: Important Operation Instructions

    • NEVER mount or dismount the treadmill while the belt is moving. FUEL Fitness treadmills start with at a very low speed and it is unnecessary to straddle the belt during start up. Simply standing on the belt during slow acceleration is proper after you have learned to operate the unit.
  • Page 7: Assembly Pack Checklist

    #125. 5/16” x 3/4” Button #126. M5 x 15mm Head Socket Bolt (4 pcs) Phillips Head Screws (6 pcs) ASSEMBLY TOOLS #90. 13mm Wrench #103. M6 L Allen Wrench #102. Combination M5 Al- len Wrench & Phillips Head Screw Driver FT98 TREADMILL...
  • Page 8: Ft98 Assembly Instructions

    FT98 ASSEMBLY INSTRUCTIONS MAIN BASE FRAME Take out the treadmill from the carton and lay it aside on the smooth ground. UPRIGHTS & CABLES Hardware Step 2 #99. 5/16” x1/2” Hex Head Bolt (8 pcs) #100. 5/16” Flat Washer (8 pcs) NOTE: This step may work better with a second person assisting.
  • Page 9 Combination M5 Allen Wrench & Phillips Head Screw Driver (102). Be very careful when assembling the console so as not to pinch the computer cables. This could lead to a short circuit and may damage the electronics and is not covered under warranty FT98 TREADMILL...
  • Page 10 5/16” x 3/4” Head Socket Bolt (4 pcs) Install Handrail Support (9) between Left and Right Uprights (5) and (4). Use the combination M5 Allen Wrench and Phillips Head Screw Driver (102) to tighten four Button Head Socket Bolts (125). FT98 TREADMILL...
  • Page 11 Phillips Head Screw (6 pcs) Install the left and right Frame Base Covers (41) and (42) on the Frame Base and secure with four Phillips Head Screws (128) by using Combination M5 Allen Wrench & Phillips Head Screw Drive (102). FT98 TREADMILL...
  • Page 12 *At the rear roller area to relieve pressure on the locking system. TRANSPORTATION INSTRUCTIONS The treadmill is equipped with four transport wheels that are engaged when the treadmill is folded. After folding simply roll the treadmill away. FT98 TREADMILL...
  • Page 13: Operation Of Your Treadmill

    When the power is turned on, the console will show the current software version, the total running mileage, hours. The treadmill will then enter idle mode, which is the starting point for operation.
  • Page 14 Incline may be adjusted anytime after belt movement. Press the INCLINE / • 10 and 12 are also available to adjust the incline percent. The incline range is from 0 to 12 levels. • The display will indicate incline position as adjustments are made. FT98 TREADMILL...
  • Page 15 Displays the cumulative calories burned at any given time during your workout. Note used for medical purposes. TO TURN TREADMILL OFF Remove tether cord. TO TURN OFF AUDIBLE BEEP follow the instructions in Engineering Mode on page 22 FT98 TREADMILL...
  • Page 16: Programmable Features

    PROGRAMMABLE FEATURES The FT98 Treadmill has a total of 24 pre-set programs. Fourteen of them (P1-P14) have only speed changes with no incline changes, while the last 10 (P15-24) have speed and incline changes programmed. TO SELECT AND START A PRESET PROGRAM 1.
  • Page 17: Heart Rate

    A definition of the lines’ goal is in the bottom left-hand corner of the chart. Whether your goal is weight loss or cardiovascular fitness, it can be achieved by training between 60% and 80% of your MHR. Consult your physician before participating in any exercise program. FT98 TREADMILL...
  • Page 18 If you are feeling tired and sluggish, it is because your body needs a break. In this condi- tion, your pace will feel harder. Again, this will show up in your RPE and you will train at the proper level for that day. FT98 TREADMILL...
  • Page 19: Using Heart Rate Transmitter

    The antenna that picks up your heart rate is very sensitive. If there is an outside noise source, turning the whole machine 90 degrees may de-tune the interference. Another Individual wearing a transmitter within 3’ of your machine’s console. If you continue to experience problems contact your dealer. FT98 TREADMILL...
  • Page 20: General Maintenance

    - that connects the motor to the front roller. If that belt is loose it feels similar to the walking belt being loose. Tightening the motor belt should be done by a trained service person. FT98 TREADMILL...
  • Page 21 Adjustments will become less of a maintenance concern as the belt is used. Proper belt tracking is an owner responsibility common with all treadmills. ATTENTION Damage to the running belt resulting from improper tracking / tension adjustments is not covered under the FUEL Fitness warranty. FT98 TREADMILL...
  • Page 22 Drag the garment the length of the entire belt 1-2 times. Remove the garment. Do not lubricate with anything other than FUEL Fitness approved lubricant. YOUR TREADMILL COMES WITH ONE TUBE OF “LUBE” AND EXTRA TUBES CAN BE ORDERED Keeping the deck lubricated at the recommended intervals ensures the longest life possible for your treadmill.
  • Page 23 Push circuit breaker in until it locks. 115 VAC wall outlet. Breaker panel circuit breaker may be tripped. Treadmill defect. Contact FUEL Fitness. Tread-belt does not stay centered The user may be walking while favoring or putting more weight on either the left or right foot. If this...
  • Page 24 Incline level is set at 10 for level 10 or 12 for level 12. Press Clear/Set after setting. 4. Press the START key to enter automatic calibration. 5. The console returns to idle mode when calibration is completed. FT98 TREADMILL...
  • Page 25: Manufacturer's Limited Warranty

    MANUFACTURER’S LIMITED WARRANTY FUEL Fitness Inc. warrants all its home use treadmill parts for a period of time listed below, from the date of retail sale, as determined by a sales receipt or in the absence of a sales receipt, eighteen (18) months from the original factory shipping date. FUEL Fitness’s responsibilities include providing new or remanufactured parts, at FUEL Fitness’s option, and technical support to our independent...

Table of Contents