Fujitsu ESPRIMO D5 Series Operating Manual page 62

System expansions
The screw positions are different for non-accessible drives and accessible drives:
• sheet metal stamping 1 (in illustration: b) valid for accessible
drives (Multicard/SmartCard reader).
• sheet metal stamping 2 (in illustration a) valid for non-accessible
drives (HDDn/SSDn, also in adapter).
► Secure the drive with the screws (a or b, depending on the type of drive).
► When installing a 3½ inch hard disk: Connect the cables to the drive.
Make sure the polarity is correct.
► Connect the other end of the cable to the corresponding USB port or SATA port of the mainboard.
► Fold the drive cage into the closed position again (see chapter
► Fit the casing cover onto the casing again (see chapter
If necessary, you must adjust the entry for the drive accordingly in the BIOS Setup.
58
"Closing the drive cage", Page
"Reattaching the casing cover.", Page
48).
37).
Fujitsu