Troubleshooting - Olympus DS-5500 Instructions Manual

Troubleshooting

Symptom Probable cause
The batteries are not loaded properly.
The battery power is low.
Nothing appears on
the display
The recorder is turned off.
The recorder is currently in Power Save mode.
The memory does not have enough space.
The card is unformatted.
Unable to record
The maximum number of files has been reached. Change to any other folder (☞ P.30).
The file is locked.
The SD card is locked.
The earphone is connected.
No playback tone
heard
The volume level is set to [00].
The file is locked.
Unable to erase
The SD card is locked.
The recorder was shaken during recording.
Noise heard during
The recorder was placed near a cell phone or
playback
fluorescent lamp while recording or during
playback.
Recording level too
The microphone sensitivity is too low.
low
Action
Make sure that the polarity is correct (☞ P.xx).
Charge or replace the batteries (☞ P.13).
Turn the power on (☞ P.16).
Press any button.
Erase unnecessary files or insert another card
(☞ P.17, P.27).
Format the card (☞ P.42).
Unlock the file from the file menu (☞ P.37).
Unlock the SD card.
Unplug the earphones to use the internal
speaker.
Adjust the volume level (☞ P.25).
Unlock the file from the file menu (☞ P.37).
Unlock the SD card.
— — —
Avoid using the recorder near cell phones or
fluorescent lamps.
Set the microphone sensitivity to the
conference mode or close-talking mode and try
again (☞ P.37).
5
EN
53