Troubleshooting - Olympus VP-20 User Manual

Troubleshooting

Problem
The display is blank.
Unable to operate
the voice recorder.
6
Unable to record.
Unable to record
with an external
microphone
Playback is
inaudible.
Playback is inaudible
from the earphones.
EN
70
Possible cause
The battery is not inserted properly.
The remaining battery power is low.
The power is OFF.
The remaining battery power is low.
The power is OFF.
The voice recorder is in HOLD mode. Release HOLD mode (☞ P.32).
There is no remaining memory.
The maximum number of
recordable files has been reached.
The microphone connected to the
microphone/earphone jack is not
detected properly.
[Select Jack] is set to [Earphone].
The earphones are connected to
the earphone jack.
[OFF] has been selected for
[Speaker].
The volume is set to [00].
The earphones connected to the
microphone/earphone jack are not
detected properly.
[Select Jack] is set to [Microphone].
The volume is set to [00].
Solution
Check that the positive and negative
terminals of the battery are placed correctly
(☞ P.7).
Replace or charge the battery
(☞ P.7, P.10).
Turn the power ON (☞ P.8).
Replace or charge the battery
(☞ P.7, P.10).
Turn the power ON (☞ P.8).
Erase unneeded files (☞ P.35).
Erase unneeded files (☞ P.35).
Set [Select Jack] to [Microphone]
(☞ P.48).
To output the playback through the built-in
speaker, disconnect the earphones.
To output the playback through the built-in
speaker, select [ON] for [Speaker] (☞ P.47).
Adjust the volume (☞ P.25).
Set [Select Jack] to [Earphone] (☞ P.48).
Adjust the volume (☞ P.25).