Table of Contents
Advertisement
Charging using docking station and USB cable
Connect the USB cable to the docking
station.
1
Charging directly via USB cable
After loading the batteries into the recorder, you
can charge them by connecting the USB cable to the
recorder.
Connect the USB cable to the recorder.
EN
14
Charging the batteries
Notes
• Charge the batteries frequently during the first
period of use. The batteries will perform better
after several charge/discharge cycles.
• Models of batteries which are different from the
included one may not be charged.
• When the recorder is connected to or a PC or
USB-connecting AC adapter via the USB cable,
the screen to set the type of USB connection will
appear when [Optional] is set for [USB Connect]
(☞ P.39).
• Charging the batteries via the USB cable
connection may not be successful depending on
the power capacity of the USB port in your PC. Use
the AC adapter instead.
• Do not set or remove the recorder from the
docking station while operating.
• Do not charge the recorder through a USB hub.
• Do not attach or remove the batteries if the USB
cable is connected.
• When charging is complete, [
indicator and [Battery Full] will appear on the
display.
• If [Alkaline] is selected on the battery type
selection screen, [
] indicator and [Cannot
Charge] will appear on the display. In this case,
the batteries cannot be charged.
• When an error occurs during charging, indicators
below and [Cannot Charge] will appear on the
display, and the charging will stop.
[
]/[
]: Abnormal high temperature
[
]/[
]: Abnormal low temperature
[
]/[
]: I nsufficient USB bus power or other
errors
] or [
]
- Quick Links:
- Recording
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
