Remote Control Operating Range - NEC Multeos M40 User Manual

Part Names and Functions

Remote Control Operating Range

Operating Range for the Remote Control
Point the top of the remote control toward the monitor's
remote sensor while pressing buttons. The remote control
can be used from the front of the monitor at a maximum
distance of 7 m/23 ft. from the front of the LCD monitor's
remote control sensor. The maximum horizontal and
vertical angle for use of the remote is 30 degree s within a
distance of 3.5 m/10 ft.
CAUTION
The remote control system may not function when direct
sunlight or strong illumination strikes the remote control
sensor of the LCD monitor, or when there is an object in
the path of the sensor.
Handling the Remote Control
Do not open the remote control other than to
install batteries.
Do not allow water or other liquid to splash onto the
remote control. If the remote control gets wet, wipe it dry
immediately.
Avoid exposure to heat and steam.
- continued
English-14
1-15
30
30
POWER POWER GUIDE GUIDE
DVI DVI VGA VGA RGB/HV RGB/HV OPTION OPTION
PIP PIP
ON/OFF ON/OFF INPUT INPUT CHANGE CHANGE
REMOTE ID REMOTE ID
SET SET RESET RESET MTS MTS SLEEP SLEEP
REMOTE CONTROLLER RU-M111 REMOTE CONTROLLER RU-M111