34
EN
Position log #3 onto the right most grate
C.
rail with the charred face to the front. Align
the groove on the underside of the log,
with the rail of the grate. Push the log back
to the pilot housing. Log #3 should fi t tight
against log #2.
W415-1103 / A / 08.07.13
3
D.
Place the end of log #5 on the right end of
E.
log #1. The fork in the log should straddle the
knot on top of log #2.
4
Place log #4 with the charred branch
pointed inward. Locate the pins into the
holes in log #1 and log #2, this will hold
the rear log in position.
5